How To fix Amd Gpu Miner Crash and freeze
How To fix Amd Gpu Miner Crash and freeze ?
i have the same problème with my rx 470 4go armor crash after 5 minute of mining and i was using a simple psu 300w and a cable 8 pin to to 4 pin molex:
the best to do is using a good power supply with multi 6 + 2 pin and if you have multi gpu and this happened just for one or 2 gpu all what you have to do is :
1) Remove all working gpu
2) Move them to the other riser an
3) Turn on your pc
4) Disable overclocking
5) Open gpuz and start mining
1) Remove all working gpu
2) Move them to the other riser an
3) Turn on your pc
4) Disable overclocking
5) Open gpuz and start mining
If the miner crash again try the same test but with one gpu and different cable and riser and remove all other and start mining using other version of claymore if you are using nicehash change other algo and try .
if this work the probleme is your power supply the PSU not giving enough power you have to add a new one .
For me it was this error :
I FIXED WITH A NEW POWER SUPPLY MINER RUNING 7/7 24/24
TROUBLESHOOTING
- Install a clean installation of Windows and Download Catalyst v15.12 for AMD cards .
- Do not overclock your gpu .
- Check Spu Power using Gpu z .
- Set Virtual Memory 16 GB.
- Reboot computer.
- Check hardware cpu ram and risers.
- Check Spu Cable
- CHANGE THE MINER SOFTWARE OR DIWNLOAD NEW UPDATE
- TRY WITH OTHER MOTHERBOARD
- Detect the error and google it
